1. Sabbaghzadeh, B., Parvizi, R., Davoodi, A., & Moayed, M. H. (2014). Corrosion evaluation of multi-pass welded nickel–aluminum bronze alloy in 3.5% sodium chloride solution: A restorative application of gas tungsten arc welding process. Materials & Design, 58, 346-356.

2. Ayoubi-Feiz, B., Aber, S., Khataee, A., & Alipour, E. (2014). Electrosorption and photocatalytic one-stage combined process using a new type of nanosized TiO2/activated charcoal plate electrode. Environmental Science and Pollution Research, 1-10.

3. Dadvar, S., Tavanai, H., & Morshed, M. (2014). Fabrication of nanocomposite PAN nanofibers containing MgO and Al2O3 nanoparticles. Polymer Science Series A, 56(3), 358-365.

4. Ghasemi, A., & Mousavinia, M. (2014). Structural and magnetic evaluation of substituted NiZnFe< sub> 2 O< sub> 4 particles synthesized by conventional sol–gel method. Ceramics International, 40(2), 2825-2834.

5. Ghasemi, A., Ekhlasi, S., & Mousavinia, M. (2014). Effect of Cr and Al substitution cations on the structural and magnetic properties of Ni< sub> 0.6 Zn< sub> 0.4 Fe< sub> 2− x Cr< sub> x/2 Al< sub> x/2 O< sub> 4 nanoparticles synthesized using the sol–gel auto-combustion method. Journal of Magnetism and Magnetic Materials, 354, 136-145.

6. Ghasemi, A., Paesano Jr, A., Machado, C. F. C., Shirsath, S. E., Liu, X., & Morisako, A. (2014). Mössbauer spectroscopy, magnetic characteristics, and reflection loss analysis of nickel-strontium substituted cobalt ferrite nanoparticles. Journal of Applied Physics, 115(17), 17A522.

7. Khataee, A., Darvishi Cheshmeh Soltani, R., Hanifehpour, Y., Safarpour, M., Gholipour Ranjbar, H., & Joo, S. W. (2014). Synthesis and characterization of dysprosium doped ZnO nanoparticles for photocatalysis of a textile dye under visible light irradiation. Industrial & Engineering Chemistry Research.

8. Mohammadigoushki, H. (2014). Dynamics and rheology of sheared two-dimensional foam.

9. Moosavifar, M. J., Moztarzadeh, F., & Azami, M. (2014). Preparation of Mineralized Electrospun Fibers as a Biomimetic Nanocomposite. International Journal of Polymeric Materials and Polymeric Biomaterials, 63(11), 576-582.

10. Noorimotlagh, Z., Darvishi Cheshmeh Soltani, R., Khataee, A. R., Shahriyar, S., & Nourmoradi, H. (2014). Adsorption of a textile dye in aqueous phase using mesoporous activated carbon prepared from Iranian milk vetch. Journal of the Taiwan Institute of Chemical Engineers.

11. Samadian, P., Parsa, M. H., & Shakeri, A. (2014). Determination of Proper Austenitization Temperatures for Hot Stamping of AISI 4140 Steel. Journal of Materials Engineering and Performance, 23(4), 1138-1145.

12. Shaterani, P., Zarei-Hanzaki, A., Fatemi-Varzaneh, S. M., & Hassas-Irani, S. B. (2014). The second phase particles and mechanical properties of 2124 aluminum alloy processed by accumulative back extrusion. Materials & Design, 58, 535-542.

13. Shokrollahi, M., Morshed, M., Semnani, D., & Rezaei, B. (2014). Development of Electro-Spun Poly (Vinyl Alcohol)/Titanium Dioxide Membrane-Based Polymer Electrolytes for Lithium-Ion Batteries. International Journal of Polymeric Materials and Polymeric Biomaterials, 63(3), 161-171.

14. Ahrari, F., Fekrazad, R., Kalhori, K. A., & Ramtin, M. (2013). Reconditioning of ceramic orthodontic brackets with an Er, Cr: YSGG laser. Lasers in medical science, 28(1), 223-228.

15. Darvishi Cheshmeh Soltani, R., Khataee, A. R., Safari, M., & Joo, S. W. (2013). Preparation of bio-silica/chitosan nanocomposite for adsorption of a textile dye in aqueous solutions. International Biodeterioration & Biodegradation, 85, 383-391.

16. Elmizadeh, H., Khanmohammadi, M., Ghasemi, K., Hassanzadeh, G., Nassiri-Asl, M., & Garmarudi, A. B. (2013). Preparation and optimization of chitosan nanoparticles and magnetic chitosan nanoparticles as delivery systems using Box–Behnken statistical design. Journal of pharmaceutical and biomedical analysis, 80, 141-146.

17. Haghdadi, N., Zarei-Hanzaki, A., Heshmati-Manesh, S., Abedi, H. R., & Hassas-Irani, S. B. (2013). The semisolid microstructural evolution of a severely deformed A356 aluminum alloy. Materials & Design, 49, 878-887.

18. Hassas-Irani, S. B., Zarei-Hanzaki, A., Bazaz, B., & Roostaei, A. A. (2013). Microstructure evolution and semi-solid deformation behavior of an A356 aluminum alloy processed by strain induced melt activated method. Materials & Design, 46, 579-587.

19. Khataee, A., Bozorg, S., Khorram, S., Fathinia, M., Hanifehpour, Y., & Joo, S. W. (2013). Conversion of Natural Clinoptilolite Microparticles to Nanorods by Glow Discharge Plasma: A Novel Fe-Impregnated Nanocatalyst for the Heterogeneous Fenton Process. Industrial & Engineering Chemistry Research, 52(51), 18225-18233.

20. Makarem, M. O. S. T. A. F. A., Sabzevar, M. H., & Ardakani, A. H. (2013). Investigation on the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel. International Journal of Engineering (1025-2495), 26(7).

21. Masaeli, E., Morshed, M., Nasr-Esfahani, M. H., Sadri, S., Hilderink, J., van Apeldoorn, A., & Moroni, L. (2013). Fabrication, characterization and cellular compatibility of poly (hydroxy alkanoate) composite nanofibrous scaffolds for nerve tissue engineering. PloS one, 8(2), e57157.

22. Mousavinia, M., Ghasemi, A., & Paimozd, E. (2013). Structural, Magnetic, and Microwave Properties of SrFe12− x (Ni0. 5Co0. 5Sn) x/2O19 Particles Synthesized by Sol–Gel Combustion Method. Journal of electronic materials, 42(9), 2784-2792.

23. Nabavi, M. S., Mohammadi, T., & Kazemimoghadam, M. (2013). Hydrothermal synthesis of hydroxy sodalite zeolite membrane: Separation of H< sub> 2/CH< sub> 4. Ceramics International.

24. Pedram Rad, Z., Tavanai, H., & Moradi, A. R. (2012). Production of feather keratin nanopowder through electrospraying. Journal of Aerosol Science, 51, 49-56.

25. Sheydaei, M., & Aber, S. (2013). Preparation of Nano‐Lepidocrocite and an Investigation of Its Ability to Remove a Metal Complex Dye. CLEAN–Soil, Air, Water, 41(9), 890-898.

26. Sheydaei, M., Aber, S., & Khataee, A. (2013). Degradation of amoxicillin in aqueous solution using nanolepidocrocite chips/H< sub> 2 O< sub> 2/UV: Optimization and kinetics studies. Journal of Industrial and Engineering Chemistry.

27. Shirzad-Siboni, M., Farrokhi, M., Darvishi Cheshmeh Soltani, R., Khataee, A., & Tajassosi, S. (2013). Photocatalytic Reduction of Hexavalent Chromium over ZnO Nanorods Immobilized on Kaolin. Industrial & Engineering Chemistry Research.

28. Shokrollahi, M., Semnani, D., Morshed, M., Rezaei, B., & Mirsoofian, M. (2013). Modeling of Ionic Conductivity Enhancement of LiClO4-PVA-C System by TiO2 Addition Using Complex Numerical Model of PDE. Journal of Materials Engineering and Performance, 22(12), 3639-3646.

29. Ahrari, F., Basafa, M., Fekrazad, R., Mokarram, M., & Akbari, M. (2012). The efficacy of Er, Cr: YSGG laser in reconditioning of metallic orthodontic brackets. Photomedicine and laser surgery, 30(1), 41-46.

30. Akbari, A., Lehib, A. Y., & Bojaranb, M. Formation of Poly (vinylidenefluoride) Nanofibers: Part I Optimization by Using of Central

31. Asadirad, M., & Yoozbashizadeh, H. (2012). Synthesis and characterization of Ce–TZP/Al< sub> 2 O< sub> 3 nanocomposites prepared via aqueous combustion. Journal of Alloys and Compounds, 514, 150-156.

32. Berahmand, M., & Sajjadi, S. A. (2012). An investigation on the coarsening behavior of γ′ precipitate in GTD-111 Ni-base superalloy. Phase Transitions, 85(1-2), 1-12.

33. Dadvar, S., Tavanai, H., Morshed, M., & Ghiaci, M. (2012). The removal of 2-chloroethyl ethyl sulfide using activated carbon nanofibers embedded with MgO and Al2O3 nanoparticles. Journal of Chemical & Engineering Data, 57(5), 1456-1462.

34. Erfanian-Naziftoosi, H. R., Haghdadi, N., & Kiani-Rashid, A. R. (2012). The effect of isothermal heat treatment time on the microstructure and properties of 2.11% Al austempered ductile iron. Journal of materials engineering and performance, 21(8), 1785-1792.

35. Haghdadi, N., Bazaz, B., Erfanian-Naziftoosi, H. R., & Kiani-Rashid, A. R. (2012). Microstructural and mechanical characteristics of Al-alloyed ductile iron upon casting and annealing. International Journal of Minerals, Metallurgy, and Materials, 19(9), 812-820.

36. Hazeri, N., Tavanai, H., & Moradi, A. R. (2012). Production and properties of electrosprayed sericin nanopowder. Science and Technology of Advanced Materials, 13(3), 035010.

37. Masaeli, E., Morshed, M., Rasekhian, P., Karbasi, S., Karbalaie, K., Karamali, F., ... & Baharvand, H. (2012). Does the tissue engineering architecture of poly (3‐hydroxybutyrate) scaffold affects cell–material interactions?. Journal of Biomedical Materials Research Part A, 100(7), 1907-1918.

38. Mehrpouya, F., Tavanai, H., Morshed, M., & Ghiaci, M. (2012). The formation of titanium dioxide crystallite nanoparticles during activation of PAN nanofibers containing titanium isopropoxide. Journal of Nanoparticle Research, 14(8), 1-11.

39. Tavanai, A. O., & Morshed, M. (2012). Electrical resistance and heat generation of polypyrrole‐coated polyacrylonitrile nanofibrous and regular fibrous mats. Polymers for Advanced Technologies, 23(9), 1302-1310.

40. F. Forghani, A. Dolatmoradi, S. Kahrobaee, J. Vahdati Khaki, M. Hadad Sabzevar, Carburising behaviour of low carbon steel with nanocrystalline surface layer induced by ball milling, Materials Science and Technology, 28(8) (2012) 959-964.

41. M. Kashefi, S. Kahrobaee, M.H. Nateq, On the Relationship of Magnetic Response to Microstructure in Cast Iron and Steel Parts, 21(7) (2012) 1520-1525.

42. Arabi, A. M., Ebadzadeh, T., Yousefi, A. A., Pishvaei, M., Rad, E. M., & Najafi, F. (2011). The Function of Nano-polystyrene Template and Comb Polycarboxylic Acid Surfactant in Synthesis of ZnS Nanoparticles via Hydrothermal Method. Iranian Polymer Journal, 20(7), 559-569.

43. Bargrizan, M., Mirkarimi, M., Rezamand, M., & Eskandarion, S. (2011). Microleakage and Micrographic Evaluation of Composite Restorations with Various Bases over ZOE Layer in Pulpo-tomized Primary Molars. Journal of Dentistry of Tehran University of Medical Sciences, 8(4), 178-185.

44. Dadvar, S., Tavanai, H., & Morshed, M. (2011). UV-protection properties of electrospun polyacrylonitrile nanofibrous mats embedded with MgO and Al2O3 nanoparticles. Journal of Nanoparticle Research, 13(10), 5163-5169.

45. Dadvar, S., Tavanai, H., Dadvar, H., Morshed, M., & Ghodsi, F. E. (2011). UV-protection and photocatalytic properties of electrospun polyacrylonitrile nanofibrous mats coated with TiO2 nanofilm via sol–gel. Journal of sol-gel science and technology, 59(2), 269-275.

46. Ghahari, M., Aghababazadeh, R., Ebadzadeh, T., Mirhabibi, A., Brydson, R., Fabbri, P., & Najafi, F. (2011). Synthesis of Suitable SiO2 Nano Particles as the Core in CoreShell Nanostructured Materials. Journal of nanoscience and nanotechnology, 11(6), 5311-5317.

47. Gholami, A., Tavanai, H., & Moradi, A. R. (2011). Production of fibroin nanopowder through electrospraying. Journal of Nanoparticle Research, 13(5), 2089-2098.

48. Oroumei, A., Tavanai, H., & Morshed, M. (2011). Radiofrequency Shielding by Polypyrrole-Coated Nano and Regular Fibrous Mats. Journal of electronic materials, 40(11), 2256-2263.

49.A. Keyvani, M. Saremi, M. Heydarzadeh Sohi, An investigation on oxidation, hot corrosion and mechanical properties of plasma-sprayed conventional and nanostructured YSZ coatings, 206 (2011), 208-216.

50. Fallahi, D., Rafizadeh, M., Mohammadi, N., & Vahidi, B. (2010). Effect of applied voltage on surface and volume charge density of the jet in electrospinning of polyacrylonitrile solutions. Polymer Engineering & Science, 50(7), 1372-1376.

51. Mahmoodi, M., Behravesh, A. H., Rezavand, S. A., & Pashaei, A. (2010). Visualization of bubble dynamics in foam injection molding. Journal of applied polymer science, 116(6), 3346-3355. A. Kamyabi-Gol, M. Sheykh-Amiri, Spheroidizing Kinetics and Optimization of Heat Treatment parameters in CK60 Steel Using Taguchi Robust Design, Journal of iron and steel research, International, 2010, 17(4), 45-52.

52. M. Kashefi, S. Kahrobaee, M.H. Nateq, Quantitative measuring of pearlite in carbon steels using electromagnetic sensor, International Journal of ISSI, 7(1) (2010) 29-32.

53. Avazkonandeh-Gharavol, M. H., Haddad-Sabzevar, M., & Haerian, A. (2009). Effect of copper content on the microstructure and mechanical properties of multipass MMA, low alloy steel weld metal deposits. Materials & Design, 30(6), 1902-1912.

54. Sadrnezhaad, S. K., & Hosseini, S. A. (2009). Fabrication of porous NiTi-shape memory alloy objects by partially hydrided titanium powder for biomedical applications. Materials & Design, 30(10), 4483-4487.
55. H. Alimadadi, M. Ahmadi, M. Aliofkhazraei, S.R. Younesi, Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy, Materials and Design 30 (2009) 1356–1361.

56. Alikhanzadeh-Arania, S., & Salavati-Niasari, M. Synthesis and characterization of high-temperature ceramic YBCO nanostructures prepared from a novel precursor.

و بیش از ده ها مقاله چاپ شده دیگر در مجلات معتبر داخلی و ارائه شده در کنفرانس های معتبر بین المللی و داخلی.